Accessories

Each one of our CO2 system components is designed and tested to the highest standards, using materials and components sourced from the best suppliers we can find.

Bleed Valve

Bleed Valve

The Ardent Bleed Valve is designed to prevent accidental discharge of a fire suppression system caused by pressure build-up due to leakage.

Manifold Burst Disc Assembly

Manifold Burst Disc Assembly

The Manifold Burst Disc Assembly is designed to be fitted into the manifold to protect the system from any accidental over-pressure.

Manifold Check Valve

Manifold Check Valve

The Ardent Manifold Check Valve is designed to fit between the manifold and the CO2 cylinder valve, stopping back pressure when the system is discharged.

Manifold Check Valve Pilot

Manifold Check Valve Pilot

The Ardent Manifold Check Valve with Pilot Line Thread is designed to fit between the manifold and the CO2 valve to stop any back pressure from occuring.

Discharge Hoses

Discharge Hoses

Our Discharge Hoses are flexible and durable, made from double-braided steel and synthetic rubber.

Manifold Pressure Switch

Manifold Pressure Switch

The Ardent Manifold Pressure Switch is designed to be fitted directly to the manifold, giving an electrical indication of any pressure present in the manifold.

Pilot Hoses

Pilot Hoses

Our Pilot Hoses connect multiple slave cylinders to a master or pilot cylinder, connecting pressure-operated devices where flexible connection is required.

Pilot Cylinder Assembly

Pilot Cylinder Assembly

The Ardent Pilot Cylinder Assembly allows pneumatic actuation of extinguishing systems from an electrical input from a control panel.